Viscosity meters:

Viscosity meter with KU measurement parameter:

This digital Stormer viscometer is an instrument applicable to determine the viscosity of the paints and other coating materials that are expressed in KU values.It is rotational shear-type viscosity meter.The design of the viscometer is based on the standards ASTM /D 562-81 and GB/T9269-88. It is controlled by microprocessor,so the operator may directly read out the KU values of the tested samples from the display and do not need to look up the table.

Specification:

Power：220V，50Hz
Leafe size：54×7.9×0.8mm
Container size：Ø85×85mm
Container volue：about 500 ml
Yard weight：5～500g
KU value range：53～141
G.W：10Kg　　　　　　
Size：220×220×390mm

V-1 Rotational viscocity meter:

Purpose:

V—1 rotational viscometer is one kind of the viscosity meter used to measure/test the viscosity resistance and absolute viscosity of liquid. It has four rotors of NO. 1-4 and can be chosen to use in accord with viscosity of the liquid to be determined rotation speed. It is widely used to determined viscosity of various liquid such as oil, paint, food, medicine, adhesive, etc in the filed of petro chemistry, medicine, food, light industry, textile industry, scientific research, etc.

Speification:

ENGLER VISCOSITY TESTER:

According to《Viscosity Tester by Engler Specific》, the viscometer is made and can cover the determination of the Viscosity of the fluids.  The ratio of two different time with which the measured fluid and 20℃ water flow through the orifice in the bottom is called Engler Viscosity of the fluids( in Ev) on the condition of the set volume and temperature ..
T
Main Structure and Technical Parameter
1、standard time of water flow：         51±1sec；
2、temperature：         0～100℃；
3、resolution：         ±0.1℃；
4、special thermometer：  In accordance with GB514-75；
6、volumetric flask：         200±0.2ml；
7、 inner test vessel：             stainless-steel wall；

The petroleum product Engler viscosimeter (number reveals):

This instrument acts according to ASTMD 1,665, the IP212 standard determination emulsified bitumen and the coal tar graciousness standard pulls the viscosity. The Engler viscosimeter is determines the petroleum product and other liquid relative viscosities gaging instruments, widely uses in the factory, the laboratory, the geological field ty and so on. The determination liquid in the certain temperature, under the volume condition, flows out the time from the Engler viscosimeter (the second ] with the distilled water the time which leaves in 20 ℃ fashion (the second ] the ratio, for this liquid relative viscosity, namely Engler viscosity, unit for condition.

Technical specification:

1.In pot stainless steel

2.Standard water number: 51±1 second

3.Determination temperature: Room temperature ~ 100 ℃

4.Controls the warm precision: ±0.2 ℃

Kinematic Viscosity Tester>>

Viscosity cup>>

Cross cutter>>

Pencil hardness tester>>

Flash point tester>>

TBN tester/Petroleum product water-soluble acid and the alkali tester>>

Automatic pitch softening point tester>>

Foaming tester>>

Melting point tester>>

Pour point tester>>