Intelligent porosity detector,pinhole tester
This intelligent porosity detector,also
called pinhole tester,holiday
detector,jeep tester or jeeper,spark tester,is
used to detect pinholes,
cracks and other damage and defects in non-conductive coating on
conductive substrate (such as metal), can be used to detect the quality
of insulating and anticorrosive coating on the surface of storage
tanks, valves and pipelines. Host for portable, rugged ABS shell, the
instrument appearance design is advanced, stable and reliable
performance, can be widely used in anticorrosive engineering, plastic
airtight joint detection, concrete coating layer air tightness test,
petrochemical pipeline corrosion inspection, enamel production
industries, is used to detect an essential tool for metal surface
insulating anticorrosive coating quality.
Main Features:
1.The special metal hose protects the
connecting cable between the main engine and the high voltage generator;
2.Military-grade gold-plated connector to
ensure the reliability of the connection;
3.Unique design, ABS case, beautiful, durable;
4.Light touch waterproof film keyboard, easy to
operate;
5.AC/DC power supply can be switched quickly
and automatically, AC/DC dual-use;
6.Large capacity lithium ion battery pack,
energy saving and environmental protection;
7.Independent high pressure button, maximum
protection of detection personnel safety, in line with international
safety standards;
8.Intelligent frequency conversion high voltage
detection technology is suitable for humid environment, the detection
process does not generate static electricity;
9.Can be detected by dew wet or muddy and
slightly conductive surface;
10.Can automatically identify different working
probe (high pressure gun), self-calibration;
11.Digital display battery voltage and output
high voltage;
12.When pinhole and other defects are detected,
acousto-optic alarm;
13.The output high voltage can be accurately
adjusted, and the display precision is high.
14. With overload protection function;
Technical parameters:
Detection
voltage: 0.5KV-7KV (1A) 6KV-35KV (2B)
Coating
thickness: 0.03mm -- 1.7mm (HD-109A) 1.4mm -- 11.3mm (HD-109B)
Resolution:
±100V
Operating
temperature: -20℃ ~ +50℃
Working
humidity: avoid condensation of dew on the surface (see DIN55670)
Alarm
signal: 86 decibels. Frequency 1500HZ. 1 second for each pinhole alarm
Voltage
display: LCD display, 3 digits
Power
supply: 12V lithium battery pack (light weight, energy saving and
environmental protection)
Working
time: 1A (16 hours),2B (12 hours)
Power
supply mode: alternating direct dual use
Charger:
110V to 230V 50/60Hz automatic conversion
Main
engine weight: 1.2 kg
Host
size: 280mm×265mm×86mm
P-001 Porosity detector:
P-001 Porosity detector is applied in the
non-destructive detection and location of pinholes,
bare spots or thin points in protective coatings applies for corrosion
protection over metal and concrete (conductive) surfaces.
With corrosion an extremely costly and disruptive worldwide problem,
preventative determination becomes essential.
For newly constructed tanks, pipelines and other installations, where
corrosion prevention coatings have had to be applies, specifications
will normally call for a specific coating to a specific thickness.
By using our Detector to verify the
competency of the sealing coatings, the contractor can be assures that
his coatings
responsibility has been met.
Complies with Standards: ISO 2746, BS
1344-11, ASTM G 6, ASTM G 62, ASTM D4787, ASTM D5162, NACE RP 04901,
NACE RP 0274, NACE RP 0188, JIS G3491, JIS G3492, AS 3894.1, EN14430
and ANSI/AWWA C 213 etc.
Specification:
Detect range
|
0.5mm~10mm(other
range are available)
|
Output voltage
|
0.5KV~30KV
|
DC power supply
|
12V
|
Display screen
|
LCD
|
Weight
|
2.2kg
|
Dimensions
|
130*88*220mm
|
P-002 Porosity detector:
Specification:
Detect range
|
30um~1mm
|
Output voltage
|
30V~1000V
|
DC power supply
|
12V
|
Display screen
|
LCD
|
Weight
|
2.2kg
|
Dimensions
|
130*88*220mm
|
P-003 Porosity detector:(With
hole memory function and avoid damage to coatings)
Detect range
|
0.5mm~10mm(other
range are available)
|
Output voltage
|
0.5KV~30KV
|
DC power supply
|
12V
|
Display screen
|
LCD
|
Weight
|
2.2kg
|
Dimensions
|
130*88*220mm
|
Accessories:High Voltage Probe, Band
Brush(Arc brush and circle brush are available), Earth Cable, Neck
Strap and Carrying Case.
Return
to top >>>
|