Color Spectrophotometer:
Designed for versatility in various applications, the 2500d is a portable integrating sphere spectrophotometer incorporating Numerical Gloss Control. The CM-2500d is a high performance, low cost, portable spectrophotometer ideal for measuring paints, plastics, automobiles, ceramics, architectural interiors, textiles, paper, food, etc.
Model:
2500d Color Spectrophotmeter
Illumination/observation system
d/8 (diffuse illumination, 8-degree viewing), equipped with simultaneous measurement of SCI (specular component included)/ SCE (specular component excluded) Conforms to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7 and JIS Z8722 Condition C standard
Sphere Size
d52mm
Light-receiving element
Silicon photodiode array
(dual 40 elements)
Spectral separation device
Diffraction grating.
Wavelength range
360 to 740nm
Wavelength pitch
10nm
Half bandwidth
Approx. 10nm
Reflectance range
0 to 175%; resolution: 0.01%
Light source
2 Pulsed xenon lamps (X4)
Measurement time
Approx. 1.5 seconds (approx. 2 seconds for fluorescent measurement)
Minimum interval between measurements
3 seconds for SCI/SCE (4 seconds for fluorescent measurement)
Battery performance
Alkaline manganese: up to 1000 measurements
Measurement/illumination area
MAV: d8mm/ d11mm
Repeatability
Spectral Reflectance: Standard deviation within 0.1% (380 to 740nm Within 0.2%)
Colormetric values: Standard deviation within ΔE*ab 0.04
Measurement Conditions: White calibration plate measured 30 times at 10-second intervals after white calibration was performed
Inter-instrument agreement
Within ΔE*ab 0.2 (MAV/SCI) based on 12 BCRA Series II color tiles compared to values measured with master body
Measurement Mode
Single measurement/automatic averaging of multiple measurements (auto mode: 3, 5, 8 times/manual mode)
Interface
RS-232C, Standard
Observer
2/10 degrees (CIE 1931/2°, CIE 1964/10°)
Illuminant
A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (simultaneous evaluation is possible using two light sources
Display data
Spectral value/graph, colorimetric value, color difference value/graph, PASS/FAIL result
Color space / colorimetric data
L*a*b*, L*C*h, CMC (1:1), CMC (2:1), CIE94, Hunter Lab, Yxy, Munsell, XYZ, MI, WI (ASTM E313/CIE), YI (ASTM E313/ASTM D1925), ISO Brightness (ISO 2470), Density status A/T, L*a*b*, L*C*h*
Data Memory
700 (SCI/SCE as a set)
Tolerance judgement
Tolerance for color difference (both box and elliptical tolerances can be set)
Power Source
4 AA-size battery or AC adapter
Operating Environment
5 to 40°C; relative humidity 80% or less wwith no condensation
Storage Environment
0 to 45°C, relative humidity 80% or less with no condensation)
Size (W x H x D)/Weight
69 x 96 x 193mm/670 grams
Standard accessories
White calibration plate, Target mask ?8mm, RS-232C cable, AC Adapter, AA-size battery (x4)
Optional Accessories
Hard case, Dust cover set, Dust cover, SpectraMagic(software), Zero calibration box
Model: 2600d
The World's FIRST portable spectrophotometer with instantaneous UV adjustment.
Lightweight and compact. Dual apertures (3mm and 8mm). Performs like a bench top spectrophotometer. Perfect for measuring fluorescents, paper, textiles, or any product with optical brighteners. Easy to use: one hand is enough to hold it, two fingers are enough to operate it. Offers features like simultaneous measurement of SCI (Specular Component Included and SCE (Specular Component Excluded).
Innovative, high quality, durable, economically priced: everything you would expect from a Konica Minolta product.
Illumination/observation system
d/8 (diffuse illumination, 8-degree viewing), equipped with simultaneous measurement of SCI (specular component included)/ SCE (specular component excluded) Conforms to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7 and JIS Z8722 Condition C standard
Sphere Size
d 52mm
Light-receiving element
Silicon photodiode array
(dual 40 elements)
Spectral separation device
Diffraction grating.
Wavelength range
360 to 740nm
Wavelength pitch
10nm
Half bandwidth
Approx. 10nm
Reflectance range
0 to 175%; resolution: 0.01%
Light source
3 Pulsed xenon lamps (X4)
Measurement time
Approx. 1.5 seconds (approx. 2 seconds for fluorescent measurement)
Minimum interval between measurements
3 seconds for SCI/SCE (4 seconds for fluorescent measurement)
Battery performance
Alkaline manganese: up to 1000 measurements
Measurement/illumination area
MAV: d8mm/ d11mm
SAV: d3mm/ d6mm (Selectable between MAV and SAV)
Repeatability
Spectral Reflectance: Standard deviation within 0.1% (380 to 740nm Within 0.2%)
Colormetric values: Standard deviation within ΔE*ab 0.04
Measurement Conditions: White calibration plate measured 30 times at 10-second intervals after white calibration was performed
Inter-instrument agreement
Within ΔE*ab 0.2 (MAV/SCI) based on 12 BCRA Series II color tiles compared to values measured with master body
UV adjustment
Instantaneous numerical adjustment (no mechanical adjustment required) With UV400nm cut filter
Measurement Mode
Single measurement/automatic averaging of multiple measurements (auto mode: 3, 5, 8 times/manual mode)
Interface
RS-232C, Standard
Observer
2/10 degrees (CIE 1931/2°, CIE 1964/10°)
Illuminant
A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (simultaneous evaluation is possible using two light sources
Display data
Spectral value/graph, colorimetric value, color difference value/graph, OK/NG result
Color space / colorimetric data
L*a*b*, L*C*h, CMC (1:1), CMC (2:1), CIE94, Hunter Lab, Yxy, Munsell, XYZ, MI, WI (ASTM E313/CIE), YI (ASTM E313/ASTM D1925), ISO Brightness (ISO 2470), Density status A/T
Data Memory
700 (SCI/SCE as a set)
Tolerance judgement
Tolerance for color difference (both box and elliptical tolerances can be set)
Power Source
4 AA-size battery or AC adapter
Operating Environment
5 to 40°C; less than 80% RH(no condensation); Installation category: 2; Pollution degree: 2
Storage Environment
0 to 45°C; less than 80% RH (no condensation)
Size (W x H x D)/Weight
69 x 96 x 193mm/670 grams
Standard accessories
White calibration plate, Target mask ?8mm, Target Mask ?3mm, RS-232C cable, AC Adapter, AA-size battery (x4)
Optional Accessories
Hard case, Dust cover set, Dust cover, SpectraMagic NX (software) , Zero calibration box
45/0 portable, hand-held spectrophotometer to measure, match and control color. Superior performance in measuring color of small, irregular surfaces, substrates with grain, texture or directional characteristics.
Model:2500c
Illumination/observation system 45/0 method (45 ring-shaped illumination, vertical viewing)
Light-receiving element Silicon photodiode array (dual 40 elements)
Spectral separation device Diffraction grating
Wavelength range 360 nm to 740 nm
Wavelength Pitch 10 nm
Half bandwidth Approx 10 nm
Reflectance range 0 to 175% resolution 0.01%
Light source 2 pulsed xenon lamps
Measurement time Approx. 1.5 seconds
Minimum interval between measurements 4 seconds
Battery Performance Alkaline manganese: Approx. 1000 measurements (at 23°C)
Measurement/Illumination area ?7 mm/?11 mm
Repeatability Colorimetric Values: Standard deviation within ΔE*ab 0.05
(Measurement conditions: White calibration plate measured 30 times at 10-second intervals after white calibration was performed)
Inter Instrument agreement Within ΔE*ab 0.25
(Average for 12 BCRA series II color tiles compared to values measured with master body; at 23°C)
Measurement mode Single measurement/automatic averaging of multiple measurements
(auto mode: 3, 5, 8 times/manual mode)
Interface RS-232C standard
Observer 2°, 10° degrees (CIE 1931/2°, CIE 1964/10°)
Illuminant A,C, D50, D65, F2, F6, F7, F8, F10, F11, F12
(Simultaneous evaluation is possible using two light sources)
Display data Spectral value/graph, colorimetric value, color difference value/graph,
PASS/FAIL result, ASSESSMENTS (except for Japanese mode)
Color Space/colorimetric data L*a*b*, L*C*h, CMC (1:1), CMC (2:1), CIE94, Hunter Lab,
Yxy, Munsell, XYZ, MI, WI (ASTM E313), WI (CIE) Yl (ASTM E313/ASTM D1925), ISO Brightness (ISO 2470), Density status A/T WI/Tint (CIE) DIN 99 Lab, DIN 99 LCh
Data memory 700
Pass/Fail Judgement Tolerance for color difference
(Both box and elliptical tolerances can be set)
Power source 4 AA-size batteries or AC adapter
Size (W x H x D) 69 x 96 x 193 mm
Weight Approx. 670 g (without batteries)
Operating temperature/humidity 5°C to 40°C, relative humidity 80% or less (at 35°C) with no condensation
Storage temperature/humidity range 0°C to 45°C, relative humidity 80% or less (at 35°C) with no condensation
Return to top >
|